Command Syntax - Revision history

Gordp: /* Colour (color) Management under Linux */

2010-07-21T19:32:48Z

Colour (color) Management under Linux

← Older revision		Revision as of 19:32, 21 July 2010
Line 74:		Line 74:
	<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)		<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)
	<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]		<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]
	Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, ~~'''final'''~~ gamma of 2.2, LCD monitor, target temp=6500K (D65), with large-ish centered patch):		Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, gamma=2.2, LCD monitor, target temp=6500K (D65), with large-ish centered patch):
	<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -t 6500 -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -t 6500 -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''
	Typically choose Option 5 from the initial menu:		Typically choose Option 5 from the initial menu:

Gordp at 19:32, 21 July 2010

2010-07-21T19:32:04Z

← Older revision		Revision as of 19:32, 21 July 2010
Line 67:		Line 67:
	==OpenLDAP==		==OpenLDAP==
	====OpenLDAP Commands====		====OpenLDAP Commands====
	On a remote machine, you can access and dump the whole LDAP tree:		On a remote machine, you can access and dump the whole LDAP tree (you'll need to supply credentials):
	ldapsearch -x -b 'dc=whiterock' -D "cn=Manager,dc=whiterock" '(objectclass=*)' -H ldap://192.168.0.110 -W ''(home)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''ldapsearch -x -b 'dc=whiterock' -D "cn=Manager,dc=whiterock" '(objectclass=*)' -H ldap://192.168.0.110 -W''' ''(home)''
	ldapsearch -x -b 'dc=iat,dc=sfu,dc=ca' -D "cn=Manager,dc=iat,dc=sfu,dc=ca" '(objectclass=*)' -H ldap://209.87.56.238 -W ''(campus)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''ldapsearch -x -b 'dc=iat,dc=sfu,dc=ca' -D "cn=Manager,dc=iat,dc=sfu,dc=ca" '(objectclass=*)' -H ldap://209.87.56.238 -W''' ''(campus)''

	==Colour (color) Management under Linux==		==Colour (color) Management under Linux==

Gordp: /* Colour (color) Management under Linux */

2010-07-21T18:51:12Z

Colour (color) Management under Linux

← Older revision		Revision as of 18:51, 21 July 2010
Line 75:		Line 75:
	<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]		<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]
	Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, '''final''' gamma of 2.2, LCD monitor, target temp=6500K (D65), with large-ish centered patch):		Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, '''final''' gamma of 2.2, LCD monitor, target temp=6500K (D65), with large-ish centered patch):
	<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -t 6500 -g 2. -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -t 6500 -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''
	Typically choose Option 5 from the initial menu:		Typically choose Option 5 from the initial menu:
	Display adjustment menu:		Display adjustment menu:

Gordp: /* Colour (color) Management under Linux */

2010-07-21T18:28:41Z

Colour (color) Management under Linux

← Older revision		Revision as of 18:28, 21 July 2010
Line 74:		Line 74:
	<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)		<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)
	<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]		<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]
	Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, '''final''' gamma of 2.2, LCD monitor, ~~default~~ target temp=6500K, with large-ish centered patch):		Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, '''final''' gamma of 2.2, LCD monitor, target temp=6500K (D65), with large-ish centered patch):
	<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -g 2.3 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -t 6500 -g 2. -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''
	Typically choose Option 5 from the initial menu:		Typically choose Option 5 from the initial menu:
	Display adjustment menu:		Display adjustment menu:

Gordp: /* Colour (color) Management under Linux */

2010-07-21T18:07:39Z

Colour (color) Management under Linux

← Older revision		Revision as of 18:07, 21 July 2010
Line 75:		Line 75:
	<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]		<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]
	Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, '''final''' gamma of 2.2, LCD monitor, default target temp=6500K, with large-ish centered patch):		Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, '''final''' gamma of 2.2, LCD monitor, default target temp=6500K, with large-ish centered patch):
	<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -g 2.4 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -g 2.3 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''
	Typically choose Option 5 from the initial menu:		Typically choose Option 5 from the initial menu:
	Display adjustment menu:		Display adjustment menu:

Gordp: /* Colour (color) Management under Linux */

2010-07-21T18:04:26Z

Colour (color) Management under Linux

← Older revision		Revision as of 18:04, 21 July 2010
Line 88:		Line 88:
	8) Exit		8) Exit

	Then, once you've got some initial numbers, choose Option 7 (and go grab a coffee; this takes a while...)		Then, once you've got some initial numbers, choose Option 7 (and go grab a coffee; this takes a while... around 17min)
	<br>		<br>
	Apply your new calibration:		Apply your new calibration:
	<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispwin 3008wfp.cal''' ''naturally, change the file-name to whatever you used :-) ''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispwin 3008wfp.cal''' ''naturally, change the file-name to whatever you used :-) ''
	Verify by eye, using Norman Koren's gamma-test-patterns: http://www.normankoren.com/makingfineprints1A.html		Verify by eye, using Norman Koren's gamma-test-patterns: http://www.normankoren.com/makingfineprints1A.html

Gordp: /* Colour (color) Management under Linux */

2010-07-21T17:43:09Z

Colour (color) Management under Linux

← Older revision		Revision as of 17:43, 21 July 2010
Line 74:		Line 74:
	<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)		<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)
	<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]		<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]
	Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, gamma of 2.2. LCD monitor, with large-ish centered patch):		Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, '''final''' gamma of 2.2, LCD monitor, default target temp=6500K, with large-ish centered patch):
	<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -g 2.4 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''
	Typically choose Option 5 from the initial menu:		Typically choose Option 5 from the initial menu:
	Display adjustment menu:		Display adjustment menu:

Gordp: /* Colour (color) Management under Linux */

2010-07-21T17:33:35Z

Colour (color) Management under Linux

← Older revision		Revision as of 17:33, 21 July 2010
Line 75:		Line 75:
	<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]		<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]
	Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, gamma of 2.2. LCD monitor, with large-ish centered patch):		Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, gamma of 2.2. LCD monitor, with large-ish centered patch):
	<font color=lime>user@hostname</font> <font color=blue>~ $</font>'''dispcal -y l -q h -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispcal -y l -q h -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''
	Typically choose Option 5 from the initial menu:		Typically choose Option 5 from the initial menu:
	Display adjustment menu:		Display adjustment menu:

Gordp: /* Colour (color) Management under Linux */

2010-07-21T17:32:26Z

Colour (color) Management under Linux

← Older revision		Revision as of 17:32, 21 July 2010
Line 73:		Line 73:
	==Colour (color) Management under Linux==		==Colour (color) Management under Linux==
	<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)		<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)
	<font color=lime[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]		<font color=lime>[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]
	Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, gamma of 2.2. LCD monitor, with large-ish centered patch):		Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, gamma of 2.2. LCD monitor, with large-ish centered patch):
	<font color=lime>user@hostname</font> <font color=blue>~ $</font>'''dispcal -y l -q h -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''		<font color=lime>user@hostname</font> <font color=blue>~ $</font>'''dispcal -y l -q h -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''

Gordp at 17:31, 21 July 2010

2010-07-21T17:31:47Z

← Older revision		Revision as of 17:31, 21 July 2010
Line 70:		Line 70:
	ldapsearch -x -b 'dc=whiterock' -D "cn=Manager,dc=whiterock" '(objectclass=*)' -H ldap://192.168.0.110 -W ''(home)''		ldapsearch -x -b 'dc=whiterock' -D "cn=Manager,dc=whiterock" '(objectclass=*)' -H ldap://192.168.0.110 -W ''(home)''
	ldapsearch -x -b 'dc=iat,dc=sfu,dc=ca' -D "cn=Manager,dc=iat,dc=sfu,dc=ca" '(objectclass=*)' -H ldap://209.87.56.238 -W ''(campus)''		ldapsearch -x -b 'dc=iat,dc=sfu,dc=ca' -D "cn=Manager,dc=iat,dc=sfu,dc=ca" '(objectclass=*)' -H ldap://209.87.56.238 -W ''(campus)''

			==Colour (color) Management under Linux==
			<font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v argyllcms''' ''(currently requires using layman, and adding the '''sunrise''' overlay)
			<font color=lime[ebuild</font> <font color=yellow>R</font> ] <font color=lime>media-gfx/argyllcms-1.1.1</font> USE="<font color=blue>-doc</font>" 0 kB [1]
			Attach the Colormunki Photo USB-device, then run (target brightness of 120mc/m^2, gamma of 2.2. LCD monitor, with large-ish centered patch):
			<font color=lime>user@hostname</font> <font color=blue>~ $</font>'''dispcal -y l -q h -g 2.2 -b 120 -P 0.5,0.5,2.0 -v 3008wfp''' ''(this will create a file 3008wfp.cal in the directory where you ran the command)''
			Typically choose Option 5 from the initial menu:
			Display adjustment menu:
			Press 1 .. 7
			1) Black level (CRT: Offset/Brightness)
			2) White point (Color temperature, R,G,B, Gain/Contrast)
			3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight)
			4) Black point (R,G,B, Offset/Brightness)
			5) Check all
			6) Measure and set ambient for viewing condition adjustment
			7) Continue on to calibration
			8) Exit

			Then, once you've got some initial numbers, choose Option 7 (and go grab a coffee; this takes a while...)
			<br>
			Apply your new calibration:
			<font color=lime>user@hostname</font> <font color=blue>~ $</font> '''dispwin 3008wfp.cal''' ''naturally, change the file-name to whatever you used :-) ''
			Verify by eye, using Norman Koren's gamma-test-patterns: http://www.normankoren.com/makingfineprints1A.html