Servers:Musashi: Difference between revisions

From Research
Jump to navigation Jump to search
No edit summary
No edit summary
Line 31: Line 31:
   grub> setup (hd1)
   grub> setup (hd1)
   grub> quit
   grub> quit
To check that GRUB is properly installed:
grub
  grub> find /boot/grub/stage1
    (hd0,0)
    (hd1,0)
  grub>
Note well - in /boot/grub/grub.conf we point to the software-RAID root, <b>not each individual drive</b>
real_root=/dev/md1

Revision as of 14:38, 30 August 2007

GRUB sometimes screws up :-(


Drive mapping:

swap = /dev/hda9
/ = /dev/hda5
/boot = /dev/hda1
/usr = /dev/hda6
/var = /dev/hda7


Software-RAID (RAID-1, mirror) mappings:

/boot = /dev/md/0 (ext2)
/ = /dev/md/1 (ext3)
/usr/ = /dev/md/2 (ext3)
/var/ = /dev/md/3 (ext3)
/tmp = /dev/md/4 (ext3)
swap = /dev/md/5 (swap)

/mnt/raid3 = /dev/sdb1 (xfs) /mnt/raid4 = /dev/sdc1 (xfs) /mnt/holding = /dev/sda1 (xfs) /exprt/mirror = /mnt/raid4/mirror


grub
  grub> root (hd0,0)
  grub> setup (hd0)
  grub> root (hd1,0)
  grub> setup (hd1)
  grub> quit

To check that GRUB is properly installed:

grub
  grub> find /boot/grub/stage1
   (hd0,0)
   (hd1,0)
  grub>

Note well - in /boot/grub/grub.conf we point to the software-RAID root, not each individual drive

real_root=/dev/md1