#! /bin/sh
# /etc/iptables.bak
# Let's save typing & confusion with variables
IPTABLES=/sbin/iptables
# Flush active rules and custom tables
$IPTABLES --flush
$IPTABLES --delete-chain
# set the defaults so that by-default incoming packets are dropped, unless explicitly allowed;
# for a desktop workstation, we'll let lots of (unpredictable) outgoing packets go freely.
$IPTABLES -P INPUT DROP
$IPTABLES -P FORWARD DROP
$IPTABLES -P OUTPUT ACCEPT
# INBOUND POLICY
# ==============
# of course, accepting loopback is a good idea
$IPTABLES -A INPUT -i lo -j ACCEPT
# (Applies to packets entering our network interface from the network,
# and addressed to this host.)
$IPTABLES -A INPUT -m state --state INVALID -j DROP
$IPTABLES -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
# ssh incoming, including non-standard port (if needed)
$IPTABLES -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT
#$IPTABLES -A INPUT -p tcp -m state --state NEW --dport 222 -j ACCEPT
# samba (smbd and nmbd) ports
$IPTABLES -A INPUT -p udp -m udp --dport 137 -j ACCEPT
$IPTABLES -A INPUT -p udp -m udp --dport 138 -j ACCEPT
$IPTABLES -A INPUT -p tcp -m state --state NEW --dport 139 -j ACCEPT
$IPTABLES -A INPUT -p tcp -m state --state NEW --dport 445 -j ACCEPT
# LDAP incoming query port
$IPTABLES -A INPUT -p tcp -m state --state NEW --dport 389 -j ACCEPT
# nagios (5666); monitor time (123), allow snmp (161)
$IPTABLES -A INPUT -p tcp -m state --state NEW --dport 5666 -j ACCEPT
$IPTABLES -A INPUT -p udp -m state --state NEW --dport 123 -j ACCEPT
$IPTABLES -A INPUT -p udp -m state --state NEW --dport 161 -j ACCEPT
# amanda tape-backups; we reach out and tape things from this machine
$IPTABLES -A INPUT -p udp -m udp --dport 10080 -j ACCEPT
$IPTABLES -A INPUT -p tcp -m state --state NEW --dport 10082 -j ACCEPT
$IPTABLES -A INPUT -p tcp -m state --state NEW --dport 10083 -j ACCEPT
# OUTBOUND POLICY
# ===============
# of course, accepting loopback is a good idea
$IPTABLES -A OUTPUT -o lo -j ACCEPT
# (Applies to packets sent to the network interface from local processes)
$IPTABLES -A OUTPUT -j ACCEPT