Linux Administration & Maintenance: Difference between revisions

From Research
Jump to navigation Jump to search
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Gentoo==
==Gentoo==
On-Campus, we can speed installation/updates by using a local source; in your /etc/make.conf:<br>
On-Campus, we can speed installation/updates by using a local source; in your /etc/make.conf:<br>
  GENTOO_MIRRORS="http://mirror.iat.sfu.ca/gentoo/"
  GENTOO_MIRRORS="rsync://musashi.iat.sfu.ca/gentoo/"
An alternative is to use an NFS mount, but if NFS breaks or is unavailable... :-(<br>
An alternative is to use an NFS mount, but if NFS breaks or is unavailable... :-(<br>
Robin: "For best performance, I recommend mounting
Robin: "For best performance, I recommend mounting
Line 10: Line 10:


===LDAP Authentication, and Home-Directory AutoMounting===
===LDAP Authentication, and Home-Directory AutoMounting===
First, make sure you have the necessary packages on your system:
First, make sure you have the necessary packages on your system '''(NOTE:  enable LDAP USE-FLAG where it appears, like autofs)''':
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v pam_ldap nss_ldap autofs'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''emerge -v pam_ldap nss_ldap autofs'''


Line 32: Line 32:
  <font color=red>hostname</font> <font color=blue>~ #</font> '''mkdir /etc/localshell'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''mkdir /etc/localshell'''


Emerge localshell and copy over /etc/localshell.conf from a working machine.
Emerge localshell and copy over [[/etc/localshell.conf]] from a working machine.
 
Modify /etc/shells to include /bin/localshell as a valid shell, like this:
# /etc/shells: valid login shells
'''/bin/localshell'''
/bin/bash
/usr/bin/nxserver
/bin/csh
/bin/esh
/bin/fish
/bin/ksh
/bin/sash
/bin/sh
/bin/tcsh
/bin/zsh




Line 63: Line 77:
  nss_base_aliases        ou=Aliases,dc=iat,dc=sfu,dc=ca
  nss_base_aliases        ou=Aliases,dc=iat,dc=sfu,dc=ca
  nss_base_netgroup      ou=Netgroup,dc=iat,dc=sfu,dc=ca
  nss_base_netgroup      ou=Netgroup,dc=iat,dc=sfu,dc=ca
nss_reconnect_tries 1 # number of times to double the sleep time
nss_reconnect_sleeptime 1 # initial sleep value
nss_reconnect_maxsleeptime 1 # max sleep value to cap at
nss_reconnect_maxconntries 3 # how many tries before sleeping


<s>Create and populate /etc/ldap.secret from a working machine.</s>


Example /etc/nsswitch.conf:
Example /etc/nsswitch.conf:


  passwd:      compat ldap
  passwd:      compat ldap [UNAVAIL=return]
  shadow:      compat ldap
  shadow:      compat ldap [UNAVAIL=return]
  group:      compat ldap
  group:      compat ldap [UNAVAIL=return]
   
   
  # passwd:    db files nis
  # passwd:    db files nis
Line 90: Line 109:




Example /etc/auto.master
Example /etc/autofs/auto.master


  /home/users    ldap:209.87.56.238:ou=home.users,ou=AutoFS,dc=iat,dc=sfu,dc=ca
  /home/users    ldap:209.87.56.238:ou=home.users,ou=AutoFS,dc=iat,dc=sfu,dc=ca
Line 128: Line 147:


===Rescuing a Gentoo System===
===Rescuing a Gentoo System===
There are two basic ways to consider:<br>
<li>  Boot from a CD
<li>  Build critical/resuce packages on another (working) machine, and then install them on the problematic box
</li>
====Rescue CD Method====
boot from a CD, typically
boot from a CD, typically
  boot: '''gentoo'''
  boot: '''gentoo'''
Line 147: Line 171:
  <font color=red>livecd</font> <font color=blue>/ #</font> '''env-update'''
  <font color=red>livecd</font> <font color=blue>/ #</font> '''env-update'''
  <font color=red>livecd</font> <font color=blue>/ #</font> '''source /etc/profile'''
  <font color=red>livecd</font> <font color=blue>/ #</font> '''source /etc/profile'''
<font color=red>livecd</font> <font color=blue>/ #</font> '''export PS1="(chroot) $PS1"'''
Grub reads the /etc/mtab file to learn about the currently mounted filesystems (you only need to do this if your rescue-work involves GRUB):
<font color=red>livecd</font> <font color=blue>/ #</font> '''cp /proc/mounts /etc/mtab'''


Now, do your rescue work.  Good luck!
Now, do your rescue work.  Good luck!
Line 156: Line 183:
  <font color=red>livecd</font> <font color=blue>root #</font> '''reboot'''
  <font color=red>livecd</font> <font color=blue>root #</font> '''reboot'''


==SUSE==
====Build Critical/Rescue files on Another Machine====
On-Campus, we can speed installation/updates by using a local source:<br>
This approach is commonly required when a machine is in such a state that it cannot compile successfully. Often the broken culprits are '''coreutils''', '''binutils''', or '''gcc'''. If the machine cannot compile, we can use another similarly-configured / similar-architecture computer to build binary packages for us; these are then simply copied, unpacked and quickly installed onto the problem machine.<br>
nfs://export/mirror/suse<br>
HINTeven if you don't have a broken system, this approach of build on one machine / install on another can be a real time-saver, if your build-host is a fast machine.<br>
 
 
* TODO: Instructions for install with LDAP working
* TODO: Instructions for auto-update configuration
 
==RedHat/Fedora==
* TODO: Instructions for install with LDAP working
 
==Ubuntu==
 
Below are instructions for setting up a Ubuntu Linux workstation. All instructions are for version 7.04.
 
To enable the use of dual-monitor display on an Nvidia video card, follow these instructions:
 
* First enable the Nvidia driver, by clicking on System > Administration > Restricted Drivers Manger, authenticating, and checking "Enabled". Close the manager, and restart the computer.
 
* Next run the following command in a Terminal, and authenticate when prompted:
<font color=red>hostname</font> <font color=blue>~ #</font> '''sudo apt-get install nvidia-settings''' 
<font color=red>hostname</font> <font color=blue>~ #</font> '''gksudo nvidia-settings''' 
 
*On the left side of the GUI, go to 'X Server Display Configuration'. Enable both displays, and choose TwinView for Configuration type. Make sure the resolutions match your monitors. Hit 'Apply' to see if these setting work for you. Your monitors should now turn into one big screen. Accept the configuration if this is true, otherwise cancel and fix the settings.
 
*Now press 'Quit' in the bottom right, log out, then log back in. You should no longer see one large screen, but a main display on the left and a secondary on the right (if this is how you configured it), and you should be able to drag windows from a window back to the other.
 
*Run the 'gksudo nvidia-settings' command above one more time. If you are satisfied with your settings, click 'Save to X Configuration File' and quit.
 
To turn on the root account enter the following command in a Terminal, authenticate, then enter/confirm a root password when prompted:
<font color=red>hostname</font> <font color=blue>~ #</font> '''sudo passwd root'''  
 
 
To enable ssh on the machine, enter the following command in a Terminal:
<font color=red>hostname</font> <font color=blue>~ #</font> '''sudo apt-get install ssh openssh-server'''
 
===LDAP Authentication, and Home-Directory Automounting===
 
First of all, make sure you have all the required packages installed on your system:
 
*libnss-ldap
*libpam-ldap
*ldap-utils
*autofs
*autofs-ldap
 
The easiest way of installing them is using the Synaptic Package Manager, found under System > Administration > Synaptic Package Manager. Also install all dependencies for the packages above. Note that when you install the libnss-ldap package, you will have to enter information regarding the LDAP setup. You can leave all these as default and change them later (actually, the only thing you should change is the tick-box that says "Make local root Database admin"; make sure its deselected), or use the info below to guide you. You will need to edit the config files manually later anyway.
 
There are several configuration files you will need, as well as several directories that must be correct:
 
/etc/libnss-ldap.conf
/etc/pam_ldap.conf
/etc/nsswitch.conf
/etc/auto.master
/etc/pam.d/common-account
/etc/pam.d/common-auth
/etc/pam.d/common-password
/etc/pam.d/common-session
/etc/localshell/
/bin/locashell
/home/users/
/home/projects/
 
Create the following directories:
 
<font color=red>hostname</font> <font color=blue>~ #</font> '''mkdir /home/users'''
  <font color=red>hostname</font> <font color=blue>~ #</font> '''mkdir /home/projects'''
<font color=red>hostname</font> <font color=blue>~ #</font> '''mkdir /etc/localshell'''
 
Copy over the /etc/localshell/* and /bin/localshell from a working machine.
 
Examples of the required files are given below, note that libnss-ldap.conf and pam_ldap.conf are identical except for one line. (See below).
 
Example libnss-ldap.conf and pam_ldap.conf file, with commented out lines ommitted:
 
'''NOTE - the first line is commented out in the pam_ldap.conf file.'''
@(#)$Id: ldap.conf,v 2.47 2006/05/15 08:13:44 lukeh Exp $
# Your LDAP server. Must be resolvable without using LDAP.
host 209.87.56.238
# The distinguished name of the search base.
base dc=iat,dc=sfu,dc=ca
# The LDAP version to use (defaults to 3
# if supported by client library)
ldap_version 2
# The distinguished name to bind to the server with.
binddn cn=Reader,dc=iat,dc=sfu,dc=ca
# The credentials to bind with.
bindpw <secret!!!>
# Reconnect policy:
bind_policy hard
nss_base_passwd        ou=Users,dc=iat,dc=sfu,dc=ca
nss_base_shadow        ou=Users,dc=iat,dc=sfu,dc=ca
nss_base_group          ou=Group,dc=iat,dc=sfu,dc=ca
nss_base_hosts          ou=Hosts,dc=iat,dc=sfu,dc=ca
nss_base_services      ou=Services,dc=iat,dc=sfu,dc=ca
nss_base_networks      ou=Networks,dc=iat,dc=sfu,dc=ca
nss_base_protocols      ou=Protocols,dc=iat,dc=sfu,dc=ca
nss_base_rpc            ou=Rpc,dc=iat,dc=sfu,dc=ca
nss_base_ethers        ou=Ethers,dc=iat,dc=sfu,dc=ca
nss_base_netmasks      ou=Networks,dc=iat,dc=sfu,dc=ca
nss_base_bootparams    ou=Ethers,dc=iat,dc=sfu,dc=ca
nss_base_aliases        ou=Aliases,dc=iat,dc=sfu,dc=ca
nss_base_netgroup      ou=Netgroup,dc=iat,dc=sfu,dc=ca
 
Example nsswitch.conf file:
 
passwd:        files ldap
group:          files ldap
shadow:        files
hosts:          files dns
networks:      files
protocols:      db files
services:      db files
ethers:        db files
rpc:            db files
netgroup:      nis
 
Example common-account file:
 
account sufficient pam_ldap.so
account required pam_unix.so
 
Example common-auth file:
 
auth sufficient pam_ldap.so
auth required pam_unix.so nullok_secure use_first_pass
 
Example common-password file:
 
password  sufficient pam_ldap.so
password  required  pam_unix.so nullok obscure min=4 max=8 md5
 
Example common-session file:
 
session sufficient pam_ldap.so
session required pam_unix.so
session optional pam_foreground.so
 
Example auto.master file:
 
/home/users    ldap:209.87.56.238:ou=home.users,ou=AutoFS,dc=iat,dc=sfu,dc=ca
/home/projects  ldap:209.87.56.238:ou=home.projects,ou=AutoFS,dc=iat,dc=sfu,dc=ca
 
 
====Troubleshooting====
 
The above instructions should work, although it may need a kick-start. Things to try:
 
* Reboot the machine, many, many times.
* Purposely break the conf files, reboot, fix, then reboot again.
* Start autofs, and log in using Terminal as an ldap user using the command: ssh user@localhost
* Comment-out (using #) the "bind_policy hard" line in libnss-ldap.conf and pam_ldap.conf
 
===Rescuing a Ubuntu System===
 
Boot from the Ubuntu installation CD (live CD), and enter the following commands in a Terminal to mount your filesystem:
 
To identify the HD/partition you wish to mount:
  <font color=red>hostname</font> <font color=blue>~ #</font> '''fdisk -l'''
 
To mount:
  <font color=red>hostname</font> <font color=blue>~ #</font> '''mount -t ext3 -o defaults /dev/$partition /mnt/'''
The command above mounts $partition to /mnt/.
 
===Customizing Compiz on Ubuntu 8.04===
 
Compiz now comes pre-installed on Ubuntu, however it doesn't allow you for much customization. To be able to tweak all the settings, follow these instructions:
 
<font color=red>hostname</font> <font color=blue>~ #</font> '''sudo apt-get install simple-ccsm'''
<font color=red>hostname</font> <font color=blue>~ #</font> '''sudo apt-get install compizconfig-settings-manager'''  
 
Now you can rum the Compiz Custom Settings Manager, from System > Preferences > Advanced Desktop Effects Settings
 
===Installing Beryl on Ubuntu 7.04===
 
Beryl has been outdated, and you may want to install Compiz instead. The latest Ubuntu comes with Compiz pre-installed, but if for some reason you have an older system and are stubborn enough to install Beryl, here's how:
 
The instructions below are copied from the Beryl Docs, they work very well. Note, these instructions are for nVidia cards only. If for any reason they don't work or you have a different card installed, the link to the Beryl-Ubuntu installation docs is here: http://wiki.beryl-project.org/wiki/Install_Beryl_on_Ubuntu#Ubuntu_7.04_.28Feisty_Fawn.29
 
*Open a terminal. Execute:
 
sudo echo "Beryl & nVidia installation script for ubuntu Ubuntu Feisty"
 
(this one line requires your password so that, the next text paste is uninterrupted.)
 
*Copy and paste all the text into the Terminal in one action. [Select all the text. Then middle button click in terminal]
 
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup.beryl-script
sudo cp /etc/apt/sources.list /etc/apt/sources.list.backup.beryl-script
echo "deb http://ubuntu.beryl-project.org feisty main
deb-src http://ubuntu.beryl-project.org feisty main" | sudo tee -a /etc/apt/sources.list
wget http://ubuntu.beryl-project.org/root@lupine.me.uk.gpg -O- | sudo apt-key add -
sudo apt-get update
sudo apt-get -y install beryl beryl-manager emerald-themes
sudo nvidia-xconfig --add-argb-glx-visuals
sudo cp /usr/share/applications/beryl-manager.desktop /etc/xdg/autostart/beryl-manager.desktop
cp  /usr/share/applications/beryl-manager.desktop ~/Desktop/beryl-manager.desktop
echo -e "Logout now and then press \e[0;31mCTRL+ALT+BACKSPACE\e[0m to restart xorg"
echo "Installation completed !"


On the build-host, as root:
<font color=red>buildhost</font> <font color=blue>root #</font> '''emerge -B ''<problem_packages>'''''  ''<you can, or course, test the build by using the -p/--pretend option:  emerge -pB>''
This builds a '''.tbz2''' tarball, with emerge information included, but does not install it onto the build-host system.  Typically this will be found on the buildhost under '''/usr/portage/packages/''<category>/<problem_package>'''''.  We must now copy this over to the targe machine (the one to be rescued):
<font color=red>buildhost</font> <font color=blue>root #</font> '''scp /usr/portage/packages/''<category>/<problem_package>'' root@target:/usr/portage/packages/All/'''
'''OR''' (depending on system specifics)
<font color=red>buildhost</font> <font color=blue>root #</font> '''scp /usr/portage/packages/''<category>/<problem_package>'' root@target:/usr/portage/packages/''<category>'''''
Now move over to the target machine (the one to be rescued):
<font color=red>target</font> <font color=blue>root #</font> '''emerge -K ''<problem_packages>'''''  ''<again, you can test the installation by invoking emerge -pK>''


*Now Logout and then press [CTRL+ALT+BACKSPACE] to restart xorg.


==Linux Tips and Tools==
==Linux Tips and Tools==
[[Linux Tips and Tools]]
[[Linux Tips and Tools]]

Latest revision as of 19:37, 28 August 2015

Gentoo

On-Campus, we can speed installation/updates by using a local source; in your /etc/make.conf:

GENTOO_MIRRORS="rsync://musashi.iat.sfu.ca/gentoo/"

An alternative is to use an NFS mount, but if NFS breaks or is unavailable... :-(
Robin: "For best performance, I recommend mounting musashi.iat.sfu.ca:/export/gentoo/distfiles on /mnt/distfiles and specifying that in your make.conf. The NFS route ensures that downloaded files go back into the mirror."
Gentoo Local-Mirror Operation

LDAP Authentication, and Home-Directory AutoMounting

First, make sure you have the necessary packages on your system (NOTE: enable LDAP USE-FLAG where it appears, like autofs):

hostname ~ # emerge -v pam_ldap nss_ldap autofs

There are seven configuration files, and two directories which must be correct:

/etc/ldap.conf
/etc/nsswitch.conf
/etc/auto.master
/etc/conf.d/autofs
/etc/localshell.conf
/etc/pam.d/system-auth
/bin/localshell
/home/users/
/home/projects/


Create the necessary directories:

hostname ~ # mkdir /home/users
hostname ~ # mkdir /home/projects
hostname ~ # mkdir /etc/localshell

Emerge localshell and copy over /etc/localshell.conf from a working machine.

Modify /etc/shells to include /bin/localshell as a valid shell, like this:

# /etc/shells: valid login shells
/bin/localshell
/bin/bash
/usr/bin/nxserver
/bin/csh
/bin/esh
/bin/fish
/bin/ksh
/bin/sash
/bin/sh
/bin/tcsh
/bin/zsh


Example /etc/ldap.conf, with commented-out portions omitted

# Your LDAP server. Must be resolvable without using LDAP.
host 209.87.56.238

# The distinguished name of the search base.
base dc=iat,dc=sfu,dc=ca

# The distinguished name to bind to the server with.
binddn cn=Reader,dc=iat,dc=sfu,dc=ca

# The credentials to bind with.
bindpw <supersecret!!>

# RFC2307bis naming contexts
nss_base_passwd         ou=Users,dc=iat,dc=sfu,dc=ca
nss_base_shadow         ou=Users,dc=iat,dc=sfu,dc=ca
nss_base_group          ou=Group,dc=iat,dc=sfu,dc=ca
nss_base_hosts          ou=Hosts,dc=iat,dc=sfu,dc=ca
nss_base_services       ou=Services,dc=iat,dc=sfu,dc=ca
nss_base_networks       ou=Networks,dc=iat,dc=sfu,dc=ca
nss_base_protocols      ou=Protocols,dc=iat,dc=sfu,dc=ca
nss_base_rpc            ou=Rpc,dc=iat,dc=sfu,dc=ca
nss_base_ethers         ou=Ethers,dc=iat,dc=sfu,dc=ca
nss_base_netmasks       ou=Networks,dc=iat,dc=sfu,dc=ca
nss_base_bootparams     ou=Ethers,dc=iat,dc=sfu,dc=ca
nss_base_aliases        ou=Aliases,dc=iat,dc=sfu,dc=ca
nss_base_netgroup       ou=Netgroup,dc=iat,dc=sfu,dc=ca
nss_reconnect_tries 1			# number of times to double the sleep time
nss_reconnect_sleeptime 1		# initial sleep value
nss_reconnect_maxsleeptime 1	# max sleep value to cap at
nss_reconnect_maxconntries 3	# how many tries before sleeping

Create and populate /etc/ldap.secret from a working machine.

Example /etc/nsswitch.conf:

passwd:      compat ldap [UNAVAIL=return]
shadow:      compat ldap [UNAVAIL=return]
group:       compat ldap [UNAVAIL=return]

# passwd:    db files nis
# shadow:    db files nis
# group:     db files nis

hosts:       files dns
networks:    files dns

services:    db files
protocols:   db files
rpc:         db files
ethers:      db files
netmasks:    files
netgroup:    files
bootparams:  files

automount:   files
aliases:     files


Example /etc/autofs/auto.master

/home/users     ldap:209.87.56.238:ou=home.users,ou=AutoFS,dc=iat,dc=sfu,dc=ca
/home/projects  ldap:209.87.56.238:ou=home.projects,ou=AutoFS,dc=iat,dc=sfu,dc=ca


Example /etc/pam.d/system-auth

 # Prompt user for pass, check against unix auth-method.
 # Includes nsswitch, so an LDAP pass will succeed, if nsswitch is configured.
 # Certain users or services may have blank passwords; we'll allow these to succeed
auth               required          pam_unix.so nullok

 # Account verification, password expiration.
 # Also checks LDAP, if nsswitch.conf is configured.
account            required          pam_unix.so

 # We don't allow changing of (logged-in user account) passwords directly on this machine
 # Use tools on LDAP server instead
password           required          pam_deny.so

 # Log username and service to /var/log/messages (audit trail)
session            required          pam_unix.so


Example /etc/conf.d/autofs

TIMEOUT=300
BROWSE_MODE="no"
USE_MISC_DEVICE="yes"
MAP_OBJECT_CLASS="organizationalUnit"
ENTRY_OBJECT_CLASS="automount"
MAP_ATTRIBUTE="ou"
ENTRY_ATTRIBUTE="cn"
VALUE_ATTRIBUTE="automountInformation"

Rescuing a Gentoo System

There are two basic ways to consider:

  • Boot from a CD
  • Build critical/resuce packages on another (working) machine, and then install them on the problematic box
  • Rescue CD Method

    boot from a CD, typically

    boot: gentoo
    

    enable swap (of course, your swap-partition may differ! Most of ours are the second primary partion, whether /dev/hda2, or /dev/sda2, or /dev/sdb2)

    livecd root # swapon /dev/sda2
    

    mount the main (root) partition, optionally the boot partition

    livecd root # mount /dev/sda3 /mnt/gentoo
    livecd root # mount /dev/sda1 /mnt/gentoo/boot
    

    get some networking going

    livecd root # dhcpcd &
    livecd root # ifconfig eth0 up
    livecd root # ifconfig  (verify we got an IP)
    

    prepare for chrooting

    livecd root # mount -t proc none /mnt/gentoo/proc
    livecd root # mount -o bind /dev /mnt/gentoo/dev
    

    set up a new environment root

    livecd root # cd /mnt/gentoo
    livecd gentoo # chroot /mnt/gentoo /bin/bash
    livecd / # env-update
    livecd / # source /etc/profile
    livecd / # export PS1="(chroot) $PS1"
    

    Grub reads the /etc/mtab file to learn about the currently mounted filesystems (you only need to do this if your rescue-work involves GRUB):

    livecd / # cp /proc/mounts /etc/mtab
    

    Now, do your rescue work. Good luck!

    To back out of the chroot, and check your fix(es)

    livecd / # exit
    livecd root # cd /
    livecd root # umount /mnt/gentoo/boot /mnt/gentoo/proc /mnt/gentoo/dev /mnt/gentoo
    livecd root # reboot
    

    Build Critical/Rescue files on Another Machine

    This approach is commonly required when a machine is in such a state that it cannot compile successfully. Often the broken culprits are coreutils, binutils, or gcc. If the machine cannot compile, we can use another similarly-configured / similar-architecture computer to build binary packages for us; these are then simply copied, unpacked and quickly installed onto the problem machine.
    HINT: even if you don't have a broken system, this approach of build on one machine / install on another can be a real time-saver, if your build-host is a fast machine.

    On the build-host, as root:

    buildhost root # emerge -B <problem_packages>   <you can, or course, test the build by using the -p/--pretend option:  emerge -pB>
    

    This builds a .tbz2 tarball, with emerge information included, but does not install it onto the build-host system. Typically this will be found on the buildhost under /usr/portage/packages/<category>/<problem_package>. We must now copy this over to the targe machine (the one to be rescued):

    buildhost root # scp /usr/portage/packages/<category>/<problem_package> root@target:/usr/portage/packages/All/
    

    OR (depending on system specifics)

    buildhost root # scp /usr/portage/packages/<category>/<problem_package> root@target:/usr/portage/packages/<category>
    

    Now move over to the target machine (the one to be rescued):

    target root # emerge -K <problem_packages>   <again, you can test the installation by invoking emerge -pK>
    


    Linux Tips and Tools

    Linux Tips and Tools