Linux Administration & Maintenance

From Research
Jump to navigation Jump to search

Gentoo

On-Campus, we can speed installation/updates by using a local source; in your /etc/make.conf:

GENTOO_MIRRORS="http://mirror.iat.sfu.ca/gentoo/"

An alternative is to use an NFS mount, but if NFS breaks or is unavailable... :-(
Robin: "For best performance, I recommend mounting musashi.iat.sfu.ca:/export/gentoo/distfiles on /mnt/distfiles and specifying that in your make.conf. The NFS route ensures that downloaded files go back into the mirror."
Gentoo Local-Mirror Operation

LDAP Authentication, and Home-Directory AutoMounting

First, make sure you have the necessary packages on your system:

hostname ~ # emerge -v pam_ldap nss_ldap autofs

There are seven configuration files, and two directories which must be correct:

/etc/ldap.conf
/etc/nsswitch.conf
/etc/auto.master
/etc/conf.d/autofs
/etc/localshell.conf
/etc/pam.d/system-auth
/bin/localshell
/home/users/
/home/projects/


Create the necessary directories:

hostname ~ # mkdir /home/users
hostname ~ # mkdir /home/projects
hostname ~ # mkdir /etc/localshell

Emerge localshell and copy over /etc/localshell.conf from a working machine.


Example /etc/ldap.conf, with commented-out portions omitted

# Your LDAP server. Must be resolvable without using LDAP.
host 209.87.56.238

# The distinguished name of the search base.
base dc=iat,dc=sfu,dc=ca

# The distinguished name to bind to the server with.
binddn cn=Reader,dc=iat,dc=sfu,dc=ca

# The credentials to bind with.
bindpw <supersecret!!>

# RFC2307bis naming contexts
nss_base_passwd         ou=Users,dc=iat,dc=sfu,dc=ca
nss_base_shadow         ou=Users,dc=iat,dc=sfu,dc=ca
nss_base_group          ou=Group,dc=iat,dc=sfu,dc=ca
nss_base_hosts          ou=Hosts,dc=iat,dc=sfu,dc=ca
nss_base_services       ou=Services,dc=iat,dc=sfu,dc=ca
nss_base_networks       ou=Networks,dc=iat,dc=sfu,dc=ca
nss_base_protocols      ou=Protocols,dc=iat,dc=sfu,dc=ca
nss_base_rpc            ou=Rpc,dc=iat,dc=sfu,dc=ca
nss_base_ethers         ou=Ethers,dc=iat,dc=sfu,dc=ca
nss_base_netmasks       ou=Networks,dc=iat,dc=sfu,dc=ca
nss_base_bootparams     ou=Ethers,dc=iat,dc=sfu,dc=ca
nss_base_aliases        ou=Aliases,dc=iat,dc=sfu,dc=ca
nss_base_netgroup       ou=Netgroup,dc=iat,dc=sfu,dc=ca


Example /etc/nsswitch.conf:

passwd:      compat ldap
shadow:      compat ldap
group:       compat ldap

# passwd:    db files nis
# shadow:    db files nis
# group:     db files nis

hosts:       files dns
networks:    files dns

services:    db files
protocols:   db files
rpc:         db files
ethers:      db files
netmasks:    files
netgroup:    files
bootparams:  files

automount:   files
aliases:     files


Example /etc/auto.master

/home/users     ldap:209.87.56.238:ou=home.users,ou=AutoFS,dc=iat,dc=sfu,dc=ca
/home/projects  ldap:209.87.56.238:ou=home.projects,ou=AutoFS,dc=iat,dc=sfu,dc=ca


Example /etc/pam.d/system-auth

 # Prompt user for pass, check against unix auth-method.
 # Includes nsswitch, so an LDAP pass will succeed, if nsswitch is configured.
 # Certain users or services may have blank passwords; we'll allow these to succeed
auth               required          pam_unix.so nullok

 # Account verification, password expiration.
 # Also checks LDAP, if nsswitch.conf is configured.
account            required          pam_unix.so

 # We don't allow changing of (logged-in user account) passwords directly on this machine
 # Use tools on LDAP server instead
password           required          pam_deny.so

 # Log username and service to /var/log/messages (audit trail)
session            required          pam_unix.so


Example /etc/conf.d/autofs

TIMEOUT=300
BROWSE_MODE="no"
USE_MISC_DEVICE="yes"
MAP_OBJECT_CLASS="organizationalUnit"
ENTRY_OBJECT_CLASS="automount"
MAP_ATTRIBUTE="ou"
ENTRY_ATTRIBUTE="cn"
VALUE_ATTRIBUTE="automountInformation"

Rescuing a Gentoo System

boot from a CD, typically

boot: gentoo

enable swap (of course, your swap-partition may differ! Most of ours are the second primary partion, whether /dev/hda2, or /dev/sda2, or /dev/sdb2)

livecd root # swapon /dev/sda2

mount the main (root) partition, optionally the boot partition

livecd root # mount /dev/sda3 /mnt/gentoo
livecd root # mount /dev/sda1 /mnt/gentoo/boot

get some networking going

livecd root # dhcpcd &
livecd root # ifconfig eth0 up
livecd root # ifconfig  (verify we got an IP)

prepare for chrooting

livecd root # mount -t proc none /mnt/gentoo/proc
livecd root # mount -o bind /dev /mnt/gentoo/dev

set up a new environment root

livecd root # cd /mnt/gentoo
livecd gentoo # chroot /mnt/gentoo /bin/bash
livecd / # env-update
livecd / # source /etc/profile

Now, do your rescue work. Good luck!

To back out of the chroot, and check your fix(es)

livecd / # exit
livecd root # cd /
livecd root # umount /mnt/gentoo/boot /mnt/gentoo/proc /mnt/gentoo/dev /mnt/gentoo
livecd root # reboot

SUSE

On-Campus, we can speed installation/updates by using a local source:
nfs://export/mirror/suse


  • TODO: Instructions for install with LDAP working
  • TODO: Instructions for auto-update configuration

RedHat/Fedora

  • TODO: Instructions for install with LDAP working

Ubuntu

Below are instructions for setting up a Ubuntu Linux workstation. All instructions are for version 7.04.

To enable the use of dual-monitor display on an Nvidia video card, follow these instructions:

  • First enable the Nvidia driver, by clicking on System > Administration > Restricted Drivers Manger, authenticating, and checking "Enabled". Close the manager, and restart the computer.
  • Next run the following command in a Terminal, and authenticate when prompted:
hostname ~ # sudo apt-get install nvidia-settings  
hostname ~ # gksudo nvidia-settings  
  • On the left side of the GUI, go to 'X Server Display Configuration'. Enable both displays, and choose TwinView for Configuration type. Make sure the resolutions match your monitors. Hit 'Apply' to see if these setting work for you. Your monitors should now turn into one big screen. Accept the configuration if this is true, otherwise cancel and fix the settings.
  • Now press 'Quit' in the bottom right, log out, then log back in. You should no longer see one large screen, but a main display on the left and a secondary on the right (if this is how you configured it), and you should be able to drag windows from a window back to the other.
  • Run the 'gksudo nvidia-settings' command above one more time. If you are satisfied with your settings, click 'Save to X Configuration File' and quit.

To turn on the root account enter the following command in a Terminal, authenticate, then enter/confirm a root password when prompted:

hostname ~ # sudo passwd root 


To enable ssh on the machine, enter the following command in a Terminal:

hostname ~ # sudo apt-get install ssh openssh-server

LDAP Authentication, and Home-Directory Automounting

First of all, make sure you have all the required packages installed on your system:

  • libnss-ldap
  • libpam-ldap
  • ldap-utils
  • autofs
  • autofs-ldap

The easiest way of installing them is using the Synaptic Package Manager, found under System > Administration > Synaptic Package Manager. Also install all dependencies for the packages above. Note that when you install the libnss-ldap package, you will have to enter information regarding the LDAP setup. You can leave all these as default and change them later (actually, the only thing you should change is the tick-box that says "Make local root Database admin"; make sure its deselected), or use the info below to guide you. You will need to edit the config files manually later anyway.

There are several configuration files you will need, as well as several directories that must be correct:

/etc/libnss-ldap.conf
/etc/pam_ldap.conf
/etc/nsswitch.conf
/etc/auto.master
/etc/pam.d/common-account
/etc/pam.d/common-auth
/etc/pam.d/common-password
/etc/pam.d/common-session
/etc/localshell/
/bin/locashell
/home/users/
/home/projects/

Create the following directories:

hostname ~ # mkdir /home/users
hostname ~ # mkdir /home/projects
hostname ~ # mkdir /etc/localshell

Copy over the /etc/localshell/* and /bin/localshell from a working machine.

Examples of the required files are given below, note that libnss-ldap.conf and pam_ldap.conf are identical except for one line. (See below).

Example libnss-ldap.conf and pam_ldap.conf file, with commented out lines ommitted:

NOTE - the first line is commented out in the pam_ldap.conf file.

@(#)$Id: ldap.conf,v 2.47 2006/05/15 08:13:44 lukeh Exp $

# Your LDAP server. Must be resolvable without using LDAP.
host 209.87.56.238

# The distinguished name of the search base.
base dc=iat,dc=sfu,dc=ca

# The LDAP version to use (defaults to 3
# if supported by client library)
ldap_version 2

# The distinguished name to bind to the server with.
binddn cn=Reader,dc=iat,dc=sfu,dc=ca

# The credentials to bind with. 
bindpw <secret!!!>

# Reconnect policy:
bind_policy hard 

nss_base_passwd         ou=Users,dc=iat,dc=sfu,dc=ca
nss_base_shadow         ou=Users,dc=iat,dc=sfu,dc=ca
nss_base_group          ou=Group,dc=iat,dc=sfu,dc=ca
nss_base_hosts          ou=Hosts,dc=iat,dc=sfu,dc=ca
nss_base_services       ou=Services,dc=iat,dc=sfu,dc=ca
nss_base_networks       ou=Networks,dc=iat,dc=sfu,dc=ca
nss_base_protocols      ou=Protocols,dc=iat,dc=sfu,dc=ca
nss_base_rpc            ou=Rpc,dc=iat,dc=sfu,dc=ca
nss_base_ethers         ou=Ethers,dc=iat,dc=sfu,dc=ca
nss_base_netmasks       ou=Networks,dc=iat,dc=sfu,dc=ca
nss_base_bootparams     ou=Ethers,dc=iat,dc=sfu,dc=ca
nss_base_aliases        ou=Aliases,dc=iat,dc=sfu,dc=ca
nss_base_netgroup       ou=Netgroup,dc=iat,dc=sfu,dc=ca

Example nsswitch.conf file:

passwd:         files ldap
group:          files ldap
shadow:         files

hosts:          files dns
networks:       files 

protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

netgroup:       nis

Example common-account file:

account sufficient	pam_ldap.so
account required	pam_unix.so

Example common-auth file:

auth	sufficient	pam_ldap.so
auth	required	pam_unix.so nullok_secure use_first_pass

Example common-password file:

password   sufficient pam_ldap.so
password   required   pam_unix.so nullok obscure min=4 max=8 md5

Example common-session file:

session sufficient	pam_ldap.so
session required	pam_unix.so
session optional	pam_foreground.so

Example auto.master file:

/home/users     ldap:209.87.56.238:ou=home.users,ou=AutoFS,dc=iat,dc=sfu,dc=ca
/home/projects  ldap:209.87.56.238:ou=home.projects,ou=AutoFS,dc=iat,dc=sfu,dc=ca


Troubleshooting

The above instructions should work, although it may need a kick-start. Things to try:

  • Reboot the machine, many, many times.
  • Purposely break the conf files, reboot, fix, then reboot again.
  • Start autofs, and log in using Terminal as an ldap user using the command: ssh user@localhost
  • Comment-out (using #) the "bind_policy hard" line in libnss-ldap.conf and pam_ldap.conf

Rescuing a Ubuntu System

Boot from the Ubuntu installation CD (live CD), and enter the following commands in a Terminal to mount your filesystem:

To identify the HD/partition you wish to mount:

 hostname ~ # fdisk -l

To mount:

 hostname ~ # mount -t ext3 -o defaults /dev/$partition /mnt/

The command above mounts $partition to /mnt/.

Customizing Compiz on Ubuntu 8.04

Compiz now comes pre-installed on Ubuntu, however it doesn't allow you for much customization. To be able to tweak all the settings, follow these instructions:

hostname ~ # sudo apt-get install simple-ccsm
hostname ~ # sudo apt-get install compizconfig-settings-manager  

Now you can rum the Compiz Custom Settings Manager, from System > Preferences > Advanced Desktop Effects Settings

Installing Beryl on Ubuntu 7.04

Beryl has been outdated, and you may want to install Compiz instead. The latest Ubuntu comes with Compiz pre-installed, but if for some reason you have an older system and are stubborn enough to install Beryl, here's how:

The instructions below are copied from the Beryl Docs, they work very well. Note, these instructions are for nVidia cards only. If for any reason they don't work or you have a different card installed, the link to the Beryl-Ubuntu installation docs is here: http://wiki.beryl-project.org/wiki/Install_Beryl_on_Ubuntu#Ubuntu_7.04_.28Feisty_Fawn.29

  • Open a terminal. Execute:
sudo echo "Beryl & nVidia installation script for ubuntu Ubuntu Feisty"

(this one line requires your password so that, the next text paste is uninterrupted.)

  • Copy and paste all the text into the Terminal in one action. [Select all the text. Then middle button click in terminal]
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup.beryl-script
sudo cp /etc/apt/sources.list /etc/apt/sources.list.backup.beryl-script
echo "deb http://ubuntu.beryl-project.org feisty main
deb-src http://ubuntu.beryl-project.org feisty main" | sudo tee -a /etc/apt/sources.list 
wget http://ubuntu.beryl-project.org/root@lupine.me.uk.gpg -O- | sudo apt-key add -
sudo apt-get update
sudo apt-get -y install beryl beryl-manager emerald-themes 
sudo nvidia-xconfig --add-argb-glx-visuals
sudo cp /usr/share/applications/beryl-manager.desktop /etc/xdg/autostart/beryl-manager.desktop 
cp  /usr/share/applications/beryl-manager.desktop ~/Desktop/beryl-manager.desktop
echo -e "Logout now and then press \e[0;31mCTRL+ALT+BACKSPACE\e[0m to restart xorg"
echo "Installation completed !"


  • Now Logout and then press [CTRL+ALT+BACKSPACE] to restart xorg.

Linux Tips and Tools

Linux Tips and Tools