File Servers: Difference between revisions

From Research
Jump to navigation Jump to search
No edit summary
No edit summary
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Spitfire ==
== Spitfire ==
=== Motherboard ===
=== Motherboard ===
*The motherboard in spitfire is a consumer ASUS P5NT Deluxe, featuring a Core2Quad CPU at 2.66GHz.  8GB DDR2-800 (PC2-6400, CL 5-5-5-18) is installed, filling all RAM slots.  There are three PCI-E slots:  1st PCI-Ex16 has 3Ware RAID controller; 2nd PCI-Ex16 has Intel quad-NIC; 3rd PCI-Ex16 has HP SCSI controller.  At initial deployment, motherboard/RAID refuse to talk about MBR/1st-stage boot; workaround is to grub-install to a USB thumb-drive.
*The motherboard in spitfire is a consumer ASUS P5NT Deluxe, featuring a Core2Quad CPU at 2.66GHz.  8GB DDR2-800 (PC2-6400, CL 5-5-5-18) is installed, filling all RAM slots.  There are three PCI-E slots:  1st PCI-Ex16 has 3Ware RAID controller; 2nd PCI-Ex16 has Intel quad-NIC; 3rd PCI-Ex16 has HP SCSI controller.  At initial deployment (June 2008), motherboard/RAID refuse to talk about MBR/1st-stage boot; workaround is to grub-install to a USB thumb-drive.
*[[Media:P5N-T_Deluxe_manual_E3506.pdf|Asus P5NT Deluxe Manual]]
*[[Media:P5N-T_Deluxe_manual_E3506.pdf|Asus P5NT Deluxe Manual]]
 
===Chenbro 4U Chassis===
The Chenbro RM414 features triple/redundant power supplies, and 16 front-accessible, latching hard-drive bays - drives slide in on caddies, and the drives themselves plug directly onto the SATA backplane.
*[[Media:Chenbro_RM414.pdf|Chenbro RM414 4U rackmount chassis manual]]
*The backplane permits '''hot''' swapping of drives:
*[[Media:Chenbro_4-port_SAS-SATA2_bakcplane_Manual_A1.pdf|4-Port SAS/SATA2 Backplane User's Manual]]
===3Ware RAID===
*True hardware-RAID, with 16 SATA ports.  These are physically bundled into four cables-of-four (multilane), which connect to the chassis backplane.  This chassis backplane accepts plug-in hard-drives, without the need to connect individual cables.
*[[Media:3ware9650SE-InstallGuide.pdf|3Ware 9650SE RAID Controller Installation Guide]]
===SCSI Controller===
*External SCSI is included for the sole purpose of connecting an external LTO3 tape-drive - backups.
*[[Media:Hp_scsi_sc11se.pdf|HP SCSI SC11SE PCI-E Adapter]]
===Networking===
*An Intel four-GigE-ports adapter is used, which features a lot of dedicated hardware to offload the main CPU.  We then "bond" (link aggregation) all four ports into a single, virtual 4GB/s port (the other end of the connection - data switch - must also be LAG-enabled)
*[[Media:Intel_pro1000_quad_nic_EXPI9404PTL_brief.pdf|Intel Pro/1000 EXPI9404PTL Quad-NIC Brief]]
===Tape Backup===
*External SCSI-attached HP Ultrium 920 (LTO3) tape drive...Don't perform over-the-network backups (can't supply data fast enough)
*[[Media:HP_ultrium_scsi_tape_drive_userguide.pdf|HP Ultrium SCSI Tape Drive User Guide]]


== Hurricane ==
== Hurricane ==
=== Motherboard ===
=== Motherboard ===
*The motherboard in hurricane is a consumer ASUS P5NT Deluxe, featuring a Core2Quad CPU at 2.66GHz.  8GB DDR2-800 (PC2-6400, CL 5-5-5-18) is installed, filling all RAM slots.  There are three PCI-E slots:  1st PCI-Ex16 has 3Ware RAID controller; 2nd PCI-Ex16 has Intel quad-NIC; 3rd PCI-Ex16 has HP SCSI controller.  At initial deployment, motherboard/RAID refuse to talk about MBR/1st-stage boot; workaround is to grub-install to a USB thumb-drive.
*The motherboard in hurricane is a consumer ASUS P5NT Deluxe, featuring a Core2Quad CPU at 2.66GHz.  8GB DDR2-800 (PC2-6400, CL 5-5-5-18) is installed, filling all RAM slots.  There are three PCI-E slots:  1st PCI-Ex16 has 3Ware RAID controller; 2nd PCI-Ex16 has Intel quad-NIC; 3rd PCI-Ex16 has HP SCSI controller.  At initial deployment (June 2008), motherboard/RAID refuse to talk about MBR/1st-stage boot; workaround is to grub-install to a USB thumb-drive.
*[[Media:P5N-T_Deluxe_manual_E3506.pdf|Asus P5NT Deluxe Manual]]
*[[Media:P5N-T_Deluxe_manual_E3506.pdf|Asus P5NT Deluxe Manual]]
 
===Chenbro 4U Chassis===
The Chenbro RM414 features triple/redundant power supplies, and 16 front-accessible, latching hard-drive bays - drives slide in on caddies, and the drives themselves plug directly onto the SATA backplane.
*[[Media:Chenbro_RM414.pdf|Chenbro RM414 4U rackmount chassis manual]]
*The backplane permits '''hot''' swapping of drives:
*[[Media:Chenbro_4-port_SAS-SATA2_bakcplane_Manual_A1.pdf|4-Port SAS/SATA2 Backplane User's Manual]]
===3Ware RAID===
*True hardware-RAID, with 16 SATA ports.  These are physically bundled into four cables-of-four (multilane), which connect to the chassis backplane.  This chassis backplane accepts plug-in hard-drives, without the need to connect individual cables.
*[[Media:3ware9650SE-InstallGuide.pdf|3Ware 9650SE RAID Controller Installation Guide]]
===SCSI Controller===
*External SCSI is included for the sole purpose of connecting an external LTO3 tape-drive - backups.
*[[Media:Hp_scsi_sc11se.pdf|HP SCSI SC11SE PCI-E Adapter]]
===Networking===
*An Intel four-GigE-ports adapter is used, which features a lot of dedicated hardware to offload the main CPU.  We then "bond" (link aggregation) all four ports into a single, virtual 4GB/s port (the other end of the connection - data switch - must also be LAG-enabled)
*[[Media:Intel_pro1000_quad_nic_EXPI9404PTL_brief.pdf|Intel Pro/1000 EXPI9404PTL Quad-NIC Brief]]
===Tape Backup===
*External SCSI-attached HP Ultrium 920 (LTO3) tape drive...Don't perform over-the-network backups (can't supply data fast enough)
*[[Media:HP_ultrium_scsi_tape_drive_userguide.pdf|HP Ultrium SCSI Tape Drive User Guide]]


== Musashi ==
== Musashi ==
Line 22: Line 54:
== Yamato ==
== Yamato ==
=== Motherboard ===
=== Motherboard ===
*The motherboard in yamato is a Tyan S2721, configured with two Xeon 2.66GHz CPU's.  Four (of six) RAM slots are currently filled:  4 pieces of 1GB ECC PC3200 (although it only required PC2100, this lower-spec memory is no longer available (June 2007)).
*The motherboard in yamato is a Tyan S2721, configured with two Xeon 2.66GHz CPUs.  Four (of six) RAM slots are currently filled:  4 pieces of 1GB ECC PC3200 (although it only required PC2100, this lower-spec memory is no longer available (June 2007)).
*Each (of two) PCI-X 64-bit slots has a single-port NIC.
*Each (of two) PCI-X 64-bit slots has a single-port NIC.
*The single PCI 32-bit slot has a 3Ware 7006-2 RAID controller.  No slots are available.
*The single PCI 32-bit slot has a 3Ware 7006-2 RAID controller.  No slots are available.
*[[Media:Yamato_tyan_s2721-533_100.pdf|Tyan S2721 Manual]]
*[[Media:Yamato_tyan_s2721-533_100.pdf|Tyan S2721 Manual]]
== HVILab ==
*IBM Intellistation Pro, capable of dual-Xeon CPUs, but only a single 2.2GHz Xeon is installed.  1GB ECC.
*Special GRUB notes:  a standard Grub intallation won't boot this machine; you must:
# '''grub'''
grub> '''root (hd0,0)'''
grub> '''install --stage2=/boot/grub/stage2 /boot/grub/stage1 d (hd0) /boot/grub/stage2 p (hd0,0)/boot/grub/menu.lst'''

Latest revision as of 18:43, 15 January 2009

Spitfire

Motherboard

  • The motherboard in spitfire is a consumer ASUS P5NT Deluxe, featuring a Core2Quad CPU at 2.66GHz. 8GB DDR2-800 (PC2-6400, CL 5-5-5-18) is installed, filling all RAM slots. There are three PCI-E slots: 1st PCI-Ex16 has 3Ware RAID controller; 2nd PCI-Ex16 has Intel quad-NIC; 3rd PCI-Ex16 has HP SCSI controller. At initial deployment (June 2008), motherboard/RAID refuse to talk about MBR/1st-stage boot; workaround is to grub-install to a USB thumb-drive.
  • Asus P5NT Deluxe Manual

Chenbro 4U Chassis

The Chenbro RM414 features triple/redundant power supplies, and 16 front-accessible, latching hard-drive bays - drives slide in on caddies, and the drives themselves plug directly onto the SATA backplane.

3Ware RAID

  • True hardware-RAID, with 16 SATA ports. These are physically bundled into four cables-of-four (multilane), which connect to the chassis backplane. This chassis backplane accepts plug-in hard-drives, without the need to connect individual cables.
  • 3Ware 9650SE RAID Controller Installation Guide

SCSI Controller

Networking

  • An Intel four-GigE-ports adapter is used, which features a lot of dedicated hardware to offload the main CPU. We then "bond" (link aggregation) all four ports into a single, virtual 4GB/s port (the other end of the connection - data switch - must also be LAG-enabled)
  • Intel Pro/1000 EXPI9404PTL Quad-NIC Brief

Tape Backup

Hurricane

Motherboard

  • The motherboard in hurricane is a consumer ASUS P5NT Deluxe, featuring a Core2Quad CPU at 2.66GHz. 8GB DDR2-800 (PC2-6400, CL 5-5-5-18) is installed, filling all RAM slots. There are three PCI-E slots: 1st PCI-Ex16 has 3Ware RAID controller; 2nd PCI-Ex16 has Intel quad-NIC; 3rd PCI-Ex16 has HP SCSI controller. At initial deployment (June 2008), motherboard/RAID refuse to talk about MBR/1st-stage boot; workaround is to grub-install to a USB thumb-drive.
  • Asus P5NT Deluxe Manual

Chenbro 4U Chassis

The Chenbro RM414 features triple/redundant power supplies, and 16 front-accessible, latching hard-drive bays - drives slide in on caddies, and the drives themselves plug directly onto the SATA backplane.

3Ware RAID

  • True hardware-RAID, with 16 SATA ports. These are physically bundled into four cables-of-four (multilane), which connect to the chassis backplane. This chassis backplane accepts plug-in hard-drives, without the need to connect individual cables.
  • 3Ware 9650SE RAID Controller Installation Guide

SCSI Controller

Networking

  • An Intel four-GigE-ports adapter is used, which features a lot of dedicated hardware to offload the main CPU. We then "bond" (link aggregation) all four ports into a single, virtual 4GB/s port (the other end of the connection - data switch - must also be LAG-enabled)
  • Intel Pro/1000 EXPI9404PTL Quad-NIC Brief

Tape Backup

Musashi

Motherboard

  • The motherboard in musashi is a Tyan S3022, configured with two Xeon 2.66GHz CPU's. All RAM slots are currently full: 4 pieces of 1GB ECC PC3200 (although it only required PC2100, this lower-spec memory is no longer available (June 2007)).
  • Each (of two) PCI-X 64-bit slots has a single-port NIC. No slots are available.
  • Tyan S3022 Manaul



Yamato

Motherboard

  • The motherboard in yamato is a Tyan S2721, configured with two Xeon 2.66GHz CPUs. Four (of six) RAM slots are currently filled: 4 pieces of 1GB ECC PC3200 (although it only required PC2100, this lower-spec memory is no longer available (June 2007)).
  • Each (of two) PCI-X 64-bit slots has a single-port NIC.
  • The single PCI 32-bit slot has a 3Ware 7006-2 RAID controller. No slots are available.
  • Tyan S2721 Manual

HVILab

  • IBM Intellistation Pro, capable of dual-Xeon CPUs, but only a single 2.2GHz Xeon is installed. 1GB ECC.
  • Special GRUB notes: a standard Grub intallation won't boot this machine; you must:
# grub
grub> root (hd0,0)
grub> install --stage2=/boot/grub/stage2 /boot/grub/stage1 d (hd0) /boot/grub/stage2 p (hd0,0)/boot/grub/menu.lst